5 and 6 Contact
These connectors are universally used in communications equipment where the highest reliability is needed under the most severe environmental conditions.
The standard 5-contact connectors meet all requirements of MIL-C-55116, latest revision.
The 6-contact connectors as well as the light-weight versions, are designed to meet all performance requirements of MIL-C-55116.
Mating is accomplished quickly with a twist-lock motion. Non-rigid contacts are spring loaded and provide positive electrical connection with minimum voltage drop.
10 Contact
The 10-contact connectors conform to MIL-C-10544, latest revision. Construction and mating action are similar to the 5-contact line. Years of successful field experience have proven the remarkable reliability of this line of connectors for all types of military and commercial communications equipment.
Features
5 and 6 Contact
- Shells - Stainless steel passivated sand-blasted
- Panel Nuts - Stainless steel passivated sand-blasted
- Contacts - Copper alloy .000030 gold per MIL-G-45204 Type I Class 0 over .001 nickel
- Insulators - Diallylphthalate per MIL-M-14F Type MDG
- Dielectric Strength—500 V RMS
- Insulation Resistance—1000 Meg ohms minimum
- Contact Resistance (mated)—0.050 Ohms maximum
- Air Pressure—2.5 psi
- Immersion—48 hrs. at 6 ft
- Durability—3000 cycles, connect and disconnect
10 Contact
- Receptacle shells - Stainless steel passivated sand-blasted
- Plug shells - Stainless steel black passivated
- Plug rear housing - Aluminium black oxide
- Panel nuts - Stainless steel passivated, sand-blasted
- Contacts - Copper alloy .000030 gold
- Insulators - Diallylphthalate per MIL-M-14F, Type MDG
- Dielectric strength—500 V RMS
- Insulation resistance—1000 Meg ohms minimum
- Contact resistance (mated)—0.015 Ohms maximum
- Air pressure—2.5 psi
- Immersion—48 hrs at 6 ft
- Durability—3000 cycles, connect and disconnect